Skip to main content

Building Comforts

Building Comforts is a trusted provider of waterproofing, heat proofing, and construction chemical solutions in Pakistan.

Contact Info

  • Office No. 4, Plot 40-C, 12th St, D.H.A Phase 6, Nishat Commercial Area, Lane Ph-6, Defence, Karachi, 75500
  • info@buildingcomforts.com
Product

PU Sealant

A one-component polyurethane sealant for flexible joints in buildings, facades and window perimeters.

PU Sealant
Polyurethane joint sealants

PU Sealant

Suitable for common construction substrates

Download TDS

BC 600 PU Sealant is a moisture-curing elastic sealant for construction joints and perimeter sealing. The supplied TDS describes a UV-protected formulation with adhesion to common building substrates and resistance to water and salt spray after curing.

  • Building expansion joints
  • Precast-panel seams
  • Window and door perimeters
  • Roof-tile and masonry joints
Product Details

Application & Performance

Application Method

Use sound, clean, dry surfaces and abrade or wire-brush concrete. Priming is usually unnecessary, but test adhesion on irregular or porous surfaces. Apply with a sausage gun and press and smooth the bead with a joint trowel. Apply at 0 to 40 °C, and dispense and smooth all sealant within 24 hours of opening the pack. Clean tools with MEK or acetone before curing.

  • Surface preparationSound, clean, dry; abrade or wire-brush concrete
  • PrimingUsually unnecessary; test on porous surfaces
  • Application methodSausage gun; smooth with a joint trowel
  • TemperatureApply at 0 to 40 °C
  • Opened packUse within 24 hours
  • Tool cleaningMEK or acetone before curing

Technical Data

The sealant forms a skin in 60 to 150 minutes and cures to a depth of 2.0 to 3.0 mm per 24 hours at 23 °C and 50% relative humidity.

  • AppearanceThixotropic, homogeneous paste
  • Available coloursGrey, black or white
  • Pack size600 ml foil sausage
  • Density at 20 °C1.20 ± 0.06 g/ml
  • Application temperature0 to 40 °C
  • Skin formation60 to 150 minutes at 23 °C, 50% RH
  • Curing depth2.0 to 3.0 mm per 24 hours
  • Shore A hardness30 ± 5 when fully cured
  • Elongation at breakOver 600%

For further information, refer to the Technical Data Sheet (TDS)

    PRODUCT INQUIRY

    Request a Quote

    Tell us about your requirements and our team will get back to you with the right product information and pricing.











    Optional. JPG, PNG, PDF or DOC files up to 10 MB.