M.Seal 550
A two-component acrylic-modified cementitious coating for seamless waterproofing of concrete, masonry and wet areas.
M.Seal 550
Seamless waterproof layer
M.Seal 550 combines a cementitious powder with an acrylic liquid to form a flexible waterproof coating. Applied by brush, roller or trowel, it protects roofs, foundations and water-retaining structures from water ingress and helps resist carbonation and chloride penetration.
- Roofs and foundations
- Water tanks and channels
- Bathrooms and sunken slabs
- Concrete surface protection
Application & Performance
How It's Applied
Remove laitance, loose particles, oil, grease and old coatings. Repair defects. Saturate concrete with clean water and remove standing water; do not apply to dry concrete. Slowly add the powder to the supplied liquid and mix at about 300 rpm. Prepare only material usable within one hour. Apply by stiff brush, roller or trowel. Use at least 1 mm per coat and allow each coat to dry before recoating to achieve the recommended 2 mm dry-film thickness.
- Minimum thickness per coat1 mm
- Working batch time1 hour
- Coverage1.94 kg/m²/mm
- Recommended dry-film thickness2 mm
- Packaging / storage20 kg kit: 15 kg powder plus 5 kg liquid.
Shelf life: six months unopened indoors, protected from sunlight and freezing.