Skip to main content

Building Comforts

Building Comforts is a trusted provider of waterproofing, heat proofing, and construction chemical solutions in Pakistan.

Contact Info

  • Office No. 4, Plot 40-C, 12th St, D.H.A Phase 6, Nishat Commercial Area, Lane Ph-6, Defence, Karachi, 75500
  • info@buildingcomforts.com
Product

Carbon Fiber - 300

Unidirectional carbon fiber fabric designed for structural strengthening and moderate reinforcement requirements. Provides reliable strength and durability while adding minimal bulk to existing structures.

Carbon Fiber - 300
Structural strengthening fabrics

Carbon Fiber - 300

Unidirectional carbon fibre fabric

Download TDS

Carbon Fiber - 300 is a unidirectional carbon fibre fabric for strengthening concrete structures. Its fibres run in one direction, so it carries load along the axis where reinforcement is needed. It is the lighter grade, suited to elements with moderate reinforcement needs, and is bonded to the concrete with a compatible epoxy system without adding noticeable bulk or weight.

  • Structural strengthening of beams, slabs and columns
  • Unidirectional fabric
  • Applied with a compatible epoxy system
Product Details

Application & Performance

Application Method

Remove paint, grind the concrete flat and keep it clean and dry. Round corners to at least 20 mm for beams and 25 mm for columns, and repair defects and cracks first. Cut the fabric to the drawings without folding it. Mix the adhesive 2:1 by weight in 1 to 2 kg batches, roll it on, then bond the fabric, smoothing along the fibres for full, bubble-free impregnation. Use generally no more than four layers, cover outdoors with plastic cloth for over 24 hours, and pull test after 7 days.

  • Surface preparationRemove paint, grind flat, keep clean and dry
  • Corner radiusMinimum 20 mm for beams, 25 mm for columns
  • Adhesive mixing2:1 by weight, finish within 30 minutes
  • Multiple layersGenerally no more than four
  • Curing protectionCover outdoors for over 24 hours
  • Pull testingAfter 7 days

Technical Data

WSD-200 and WSD-300 are High Strength Grade 1 carbon fibre fabrics with areal weights of 200 and 300 g/m² and thicknesses of 0.111 and 0.167 mm. The Level 1 technical table specifies tensile strength of at least 4900 MPa.

  • WSD-200 areal weight200 g/m²
  • WSD-200 thickness0.111 mm
  • WSD-300 areal weight300 g/m²
  • WSD-300 thickness0.167 mm
  • Strength gradeHigh Strength Grade 1
  • WSD-300 appearanceBlack fabric
  • Fibre orientation0° unidirectional
  • WSD-300 length100 m
  • Standard widths100, 150, 200, 250, 300 and 500 mm; custom widths available

    PRODUCT INQUIRY

    Request a Quote

    Tell us about your requirements and our team will get back to you with the right product information and pricing.











    Optional. JPG, PNG, PDF or DOC files up to 10 MB.