Curing Compound 107
A concrete curing compound used to limit early moisture loss after placement.
Curing Compound 107
Supports early-age concrete care
Curing Compound 107 is a water-based, solvent-free wax emulsion used to reduce moisture loss during early curing, helping protect fresh concrete while strength develops. Compatibility with later coatings and finishes should be checked for the supplied formulation.
- Fresh concrete surfaces requiring a specified curing treatment
- Water-based and solvent-free
- White, solar-reflective film
Application & Performance
Application Method
Spray evenly onto freshly placed concrete at 5 to 6 m² per litre in a single application. On horizontal surfaces apply once the initial surface sheen disappears, and on formed concrete immediately after removing formwork. Dampen vertical and formed surfaces with clean water first. Remove the film completely before applying finishes or other treatments.
- Application methodSpray evenly
- Horizontal surfacesAfter the initial surface sheen disappears
- Formed concreteImmediately after removing formwork
- Coverage5 to 6 m²/L
- ApplicationsSingle application
Technical Data
The wax emulsion contains white pigment and forms a moisture-retaining curing membrane with 60 to 80% daylight reflectance at recommended coverage. Drying time is 3 hours, and it meets ASTM C309 Type 2 Class A.
- AppearanceWhite milky liquid
- Specific gravity0.9 to 1.01
- FlashpointNot applicable
- Finished filmWhite, solar reflective, tack-free and water repellent
- Daylight reflectance60 to 80% at recommended coverage
- Water retentionPass (ASTM C309)
- Drying time3 hours (ASTM C309)
- StandardASTM C309 Type 2 Class A
For further information, refer to the Technical Data Sheet (TDS)