Skip to main content

Building Comforts

Building Comforts is a trusted provider of waterproofing, heat proofing, and construction chemical solutions in Pakistan.

Contact Info

  • Office No. 4, Plot 40-C, 12th St, D.H.A Phase 6, Nishat Commercial Area, Lane Ph-6, Defence, Karachi, 75500
  • info@buildingcomforts.com
Product

Roof / Bitumen Membrane

Bituminous sheet waterproofing for roof and below-ground applications, offered in 3 mm and 4 mm options.

Roof / Bitumen Membrane
Sheet waterproofing membranes

Roof / Bitumen Membrane

Sheet-based waterproof barrier

Building Comforts supplies bitumen membrane systems for roof and basement waterproofing. The correct membrane grade, reinforcement and surface finish should be selected for the substrate, exposure and protective covering. Junctions, laps and penetrations form part of the complete system.

  • Roofs and terraces
  • Basements and foundation protection
Product Details

Application & Performance

Application Method

Torch-applied APP bitumen membranes are used for roofs, foundations, basements and wet areas. Clean, dry and smooth the surface, apply Advacoat as primer and let it dry completely. Unroll and align the membrane, then heat the underside film and substrate evenly with a propane torch to bond it. Keep 80 to 100 mm side overlaps and 150 mm end overlaps, weld the overlaps fully and seal seams with a heated trowel. PP membranes need protection within 15 to 30 days, while mineral-finish membranes are for exposed applications.

  • Surface preparationClean, dry and smooth; remove dust, oil and loose particles
  • PrimerAdvacoat, dried completely
  • Torch applicationHeat underside film and substrate evenly with a propane torch
  • Side overlaps80 to 100 mm for PP membranes; at least 100 mm for mineral membranes
  • End overlaps150 mm
  • PP membrane protectionCover within 15 to 30 days

Technical Data

Available types are PP and Mineral, in 3 mm and 4 mm thicknesses. The performance values below are the supplied specifications and should be confirmed against the selected product’s declared data.

  • TypesPP / Mineral
  • MaterialAPP-modified bitumen
  • Nominal thickness3 mm: 3.0 ± 0.2 mm; 4 mm: 4.0 ± 0.2 mm
  • Roll dimensions1 m × 10 m
  • Gross roll area10 m² before overlaps
  • Mineral upper finishNatural or colored slate granules
  • Lower surfaceThermofusible PE film
  • Approximate roll weight (plain finish)3 mm: 32–35 kg; 4 mm: 42–46 kg
  • Approximate roll weight (mineral)3 mm: 38–42 kg; 4 mm: 48–52 kg

    PRODUCT INQUIRY

    Request a Quote

    Tell us about your requirements and our team will get back to you with the right product information and pricing.











    Optional. JPG, PNG, PDF or DOC files up to 10 MB.