908 Admix
A high-range water-reducing and retarding admixture for flowable concrete, workability retention and high-strength mix designs.
908 Admix
Ready-mixed concrete
Super Plasticizer SP-908 is a polycarboxylate-ether-based concrete admixture that disperses cement and improves flow without adding excess water. It supports high-grade concrete, pumping and longer workability, including ready-mix transport and hot-weather placement.
- Ready-mixed and precast concrete
- Walls, columns, beams and slabs
- Foundations
- Micro-silica and prestressed concrete
Application & Performance
Application Method
Confirm compatibility, water reduction, dosage and setting time on the actual project mix. Add with the mixing water, ideally after 50 to 70% of the water has entered the mixer. Do not add to dry cement or dry aggregate. Set the final dosage by trial.
- Dosage range1.0 to 1.5% of cement
- Reported workabilityOver 3 hours
- Shelf life12 months, under cover, dry and frost-free
Technical Data
Consumption is 1.0 to 1.5% of cement, with workability beyond three hours at 20 °C. Site temperature and materials affect results. Cure fresh concrete carefully in hot and dry conditions.
- AppearanceBrown liquid
- Specific gravity1.16 to 1.18
- Chloride / nitrate contentNil / Nil
- Air contentUnder 1%
- Referenced standardsASTM C494 Types A, F and G; BS 5075 Part 1
For further information, refer to the Technical Data Sheet (TDS)