QIS CRS TT
Crystalline waterproofing system designed to protect concrete foundations and structures against water penetration.
QIS CRS TT
Crystallized Waterproofing Material Applied By Spreading
QIS CRS TT is an insulation material used to provide water insulation in the foundation insulation of structures. The crystallized chemicals in QIS CRS TT react within the applied structure, forming insoluble crystals that penetrate the capillary cavities — preventing the passage of water and providing long-lasting waterproofing as part of the structure itself.
- Structure foundations
- Underground floors
- Horizontal construction joints (on fresh concrete)
- Stationary construction joints (in place of water-retaining tape)
Application & Performance
How It's Applied
After the iron and mould are laid, the material is sprinkled directly onto the lean concrete at a rate of roughly 3 kg/m². To control consumption, one 20 kg bag is typically spread across a 6 m² area. The crystallization reaction begins as soon as fresh concrete is poured over the sprinkled material, sealing it permanently into the foundation.
- Application MethodSprinkled under foundation
- Consumption3-4 kg/m²
- Packaging20 kg kraft bag
Technical Data
Resistant to both positive and negative water pressure, and does not reduce the compressive strength of the concrete it becomes part of — its inorganic chemical structure allows the surface to continue breathing normally.
- Applicable Ground Temp.+5°C / +35°C
- Service Temperature-20°C / +80°C
- Adhesion to Concrete> 2 N/mm²
- Setting Time (20°C)6 hrs initial / 24 hrs final
- Capillary Water Absorption≤ 0.1 kg.m².hour⁰·⁵
- Mix Density1.95 ± 0.1 kg/L
- Water Mixing Ratio31-35%