Skip to main content

Building Comforts

Building Comforts is a trusted provider of waterproofing, heat proofing, and construction chemical solutions in Pakistan.

Contact Info

  • Office No. 4, Plot 40-C, 12th St, D.H.A Phase 6, Nishat Commercial Area, Lane Ph-6, Defence, Karachi, 75500
  • info@buildingcomforts.com
Product

QIS ACRIMAX-UV

ACRI-MAX is a one-component, water-based, UV-resistant elastomeric coating that waterproofs cement-based structures and provides chemical resistance.

QIS ACRIMAX UV
Roof waterproofing

QIS ACRIMAX UV

Elastomeric resin-based, UV resistant waterproofing coating

Download TDS

QIS ACRIMAX UV is an acrylic, elastomeric resin-based, single-component, water-based, UV resistant, elastic waterproofing coating. It is jointless, seamless and flexible enough to bridge micro-cracks in the structure beneath it.

  • All cement-based screed and plaster
  • Indoor and outdoor use
  • Terraces and roofs
  • Exterior building facades
  • Vertical and horizontal surfaces
  • Concrete, zinc and precast surfaces
Product Details

Application & Performance

Application Method

Remove dust, oil and curing compounds and repair cracks and damaged areas. Prime with QIS PRIM 100 or equal parts QIS ACRIMAX UV and water, drying for at least 1 hour at 20 °C. Mix in the original container at 400 to 600 rpm for 3 to 5 minutes, then apply at least two coats at right angles by brush, roller or airless sprayer, at a maximum of 1.5 mm per coat. Protect from weather for at least 2 days.

  • PrimerQIS PRIM 100, or equal parts coating and water
  • Mixing400 to 600 rpm for 3 to 5 minutes
  • Coat thicknessMaximum 1.5 mm per coat
  • Recoating3 to 6 hours at 20 °C
  • Consumption per coat500 to 750 g/m²
  • Total consumption1.50 kg/m² per mm; terraces 2 to 3 kg/m²

Technical Data

This single-component, water-based acrylic coating is UV-resistant and bridges cracks of at least 2 mm at 20 °C. Drying times are based on 20 °C and 50% relative humidity.

  • MaterialWater-based elastomeric acrylic resin
  • ColourWhite
  • Density1.40 ± 0.02 kg/L
  • Application temperature+10 to +35 °C
  • Service temperature-20 to +80 °C
  • FlexibilityOver 250%
  • Drying time at 20 °CInitial 4 to 5 hours; final 48 hours
  • Capillary water absorptionAt most 0.1 kg/(m²·h⁰·⁵)

For further information, refer to the Technical Data Sheet (TDS)

    PRODUCT INQUIRY

    Request a Quote

    Tell us about your requirements and our team will get back to you with the right product information and pricing.











    Optional. JPG, PNG, PDF or DOC files up to 10 MB.